KATUMO Siphon Pump for Gasoline, Oil, Diesel & Water

Efficient Hand Fuel Pump for Daily Simple and Emergency Needs

Specifications: - Material: Rubber / PVC / Metal - Outer Diameter of Hose: 15mm / 0.59" - Thickness of Hose: 2mm / 0.08" - Length of Longer Hose: 1.2m / 47" - Length of Shorter Hose: 0.8m / 31"

Note: The two hoses are in different sizes. The longer hose or the shorter hose can be placed at the source container or the target container based on your use condition.

Multi-purpose: - The siphon pump can work efficiently to remove or change the gasoline from your lawn mower, brush cutter, snow blower, tractor, reaper, etc., various equipment which without anti-theft filter net or anti-spill valve. - It is a must-have portable tool for your motorcycle, scooter, car to keep the engines running when in an emergency, especially during long drives. - The manual pump can be a water transfer for the fish tank at home. It can even be used to build a portable camping sink for washing hands and equipment.

Method 1 - Gravity Required: 1. The source fluid should be 11 inches or more higher than the target one (the greater the height difference, the better the effect). 2. Put a metal clip on one end of each hose, then connect the hoses to both ends of the pump bulb. 3. Secure the end of the hose and pump bulb with clips, make it won't leak fluid. Fix the hose to the container with the hose retainer, that can stay the hose into the container and will not slip out. 4. You can fix the brass extender to the hose end, to aggravate hose down in source fluid or serve as a hose extender in the destination container. 5. Put the input hose into the source fluid, the black arrow which on the pump bulb points to the exit flow direction. Then squeeze the pump bulb 3 to 4 times. 6. When the liquid comes close to the pump bulb, place the outlet hose into the target container. Then the liquid will keep flowing automatically. If the bottom liquid is too low to flow, you can squeeze the pump bulb by hand to finish the pumping job.

Method 2 - No Gravity Required: 1. There is no height difference required between the source container and target container. But you need to KEEP squeezing the pump bulb BY HAND to finish the job. 2. Put a clip on one end of each hose, then connect the hoses to both ends of the pump bulb. 3. Secure the junction of hose and pump bulb with a clip, make it won't flop out or leak fluid. Fix the hose to the container with the hose retainer, that can stay the hose into the container and will not slip out. 4. You can fix the brass extender to the hose end, to aggravate hose down the container or fluid or serve as a hose extender in the destination container. 5. Put the input hose into the source fluid, the black arrow which on the pump bulb points to the direction of flow. Then squeeze the pump bulb 3 to 4 times. 6. When the liquid comes close to the pump bulb, place the outlet hose into the target container. Then keep squeezing the pump bulb continually with hands to control the flow rate, till the transfer job is done.

Self-check Points When Siphon Pump Can't Work Normally: 1. The source container should be placed HIGHER than the target container when using the "Gravity Required" way. 2. Both of the source and destination containers are not in a sealed state. 3. The indicator arrow which on the pump bulb is towards the exit flow direction, down to the target container. 4. Both of the hoses are not knotted or twisted together. 5. Exhaust the gas out from the hoses before using. 6. Keep the end of the two hoses inside the containers during use, NOT just on the surface.

Get and Note: - Pump Bulb x1 - Hose (31" / 47") x2 - Metal Clip x2 - Hose Retainer x1 (Colors sent randomly) - Brass Extender x 1 - Use with room-temperature liquids ONLY - Never start the siphon with your mouth, it's extremely dangerous and inefficient

QUALITY MADE: Durable rubber pump bulb for fast and efficient transfer, with 2 enlarged caliber and flexible PVC hoses for siphoning fluid more quickly and visual working progress. Two metal clips for fixing the hose in place, prevent slippage and leakage. An adjustable hose retainer (color sent randomly) for keeping the hose standing into the container or receiver and one multi-purpose brass tip as a weight to sink the hose or a way to extend the hose length.

EASY USE: Say goodbye to the dangerous and inefficient mouth start siphon way. Just connect the hoses to the pump bulb, the black arrow towards the fluid following direction, put the upper hose into the source tank, a few squeezes of the bulb will get the fluid started flowing, then put the lower hose into the receiver tank, the fluid will flow automatically (The source fluid must be higher 11 inches or more than the receiver).

EFFICIENT TRANSFER: Ideal for emergency liquid transfer, suitable for gasoline, oil, water, diesel, and other common liquids, NOT for edible oil, drinking water, salt water, and any chemical & corroding liquid. Easy to carry and store.

MULTI-USE: Portable enough for simple daily use, applicable for medium and small-type equipment without anti-theft filter net, such as brush cutter, lawn mover, hedge trimmer, snow blower, motorcycle, ATV, lawn tractor, leaf blowers, etc., NOT for big truck types.

EASY MAINTAIN: After the job's done, drain all liquid from the pump bulb and hoses, clean thoroughly and air dry. Efficiently refill the fuel to your device and make it active.

product information: